Knowledge Base
Instreamer answers:
- Use the Barix Instreamer as an MoH Source on Cisco CUCM
- How to configure a stream relay?
- How to do a serial firmware update?
- How to stream a wav file via FFMPEG to Exstreamer ?
- How to enter the bootloader mode when "Update" button is not available ?
- Streaming RTP G.711 with Instreamer
- How to send metadata to a shoutcast server
- Stream To Considerations
- Bit Rate Calculation
- What is the Instreamer?
- How to get the IP Address
- Can I distribute IP Audio over a SCA channel with an Instreamer ?
- How do I configure a Instreamer-Exstreamer audio connection ?
- Is there a way to connect to the Barix Instreamer directly? We would like to get the audio from the device with as little lag as possible.
- I want to play the stream of an Instreamer with Windows Media Player, but it does not work
- How do I set the Instreamer to feed streaming audio to a stream hosting company ?
- I have set up multiple shoutcast destinations on my Instreamer. Can I use different passwords for different streams?
- How many destinations can I stream to ?
- How much bandwidth do I need to stream audio ?
- May I configure the stream EXACTLY at 64 kps (or some other value) on Instreamer 100 ?
- What kind of streams does the Instreamer produce ?
- Can the Instreamer also encode AAC+ ?
- Can the Instreamer also encode WMA ?
- How are Input Peak Levels measured?
- How to configure a Instreamer-Exstreamer audio connection within the same LAN
- How to customize Barix Firmwares?
- Can the Instreamer be used as SIP BGM?
- What product supports the SIP OnHold?
- Can I get the device's current IP in my BCL program?
- How to change the UI of a device?
- Which firmware should you use for which hardware?
- Use the Barix Instreamer as an MoH Source on FreePBX
- Which SNMP version does the Instreamer support ?
- How to convert the level values to db values ?
- How to execute an Emergency Update ?
Perhaps also interesting:
- What is the difference between a package number and a device number?
- On the fly IP Address change
- WLAN Broadcast/Multicast Troubleshooting
- How to use Bit-reservoir?
- What is the difference in using PCM MSB and PCM LSB?
- How do emergency messages work ?
- How much latency should I expect in an Instreamer/Exstreamer setup using BTRP ?
- What does BRTP stand for ?
- What does RTP stand for ?
- Which port/s do your devices commonly use ?
- I want to do a broadcast over different subnets, is that possible ?
- I want to set up a local network with more than 250 devices, what do i have to do ?
- Do the Barix products support IPv6 ?
- Do the Barix products support Multicast and IGMP ?
- What is AutoIP, IPzator, etc.and how do I use them?
- SonicIP Voice - can I change this and record my own ?
- What is SonicIP?
- The device already has a password either I don't remember or I don't know, how do I erase it ?
- What if the device is still unreachable after a serial rescue ?
- How do I get the "status page" of any device ?
- How do I set the device back to factory defaults ?
- How do I do a web update of a device ?
- How do i connect a Barix device to HSPDA, UMTS, CDMA, EVDO, wireless networks ?
- What if my routers don't have a fix IP address from the ISP (Internet service provider) ?
- How do the devices get their IP address
- Are there any known security vulnerabilities with Barix devices?
- SIP with Siemens Gigaset
- When was RTP Buffering - Frame Based Buffering introduced?
- Which features are supported by the PC software, ICgraph?
- What you need to know about the ICgraph
- What to do with the SIP client
- How to create music channels on your network
- How to get the software
- How does the Barix system work?
- What is Digital Rights Management?
- Does the new Streaming Client version support the automatic Remote Firmware?
- What is the best way to Stream RTP from PC to Barix Devices?
- What to do with VSC support in the Streaming Client?
- How does the stream switching in the Streaming Client work?
- Windows Media Streaming (MMS/WMA)
- How to configure multicast?
- Protocols used in Barix Products
- SonicIP Howto
- How to customize the default configuration settings of your Barix Audio product.
- What you need to know about the Configuration Update
- Which of the 4 methods to use for operating a FW Update
- How to mount the ESD protection springs?
- Which firmware should you use for which hardware?