Knowledge Base
- Schedule message playing in RetailPlayer using Icecast server
- How to scan a QR Code with your phone
- RetailPlayer Device security
- Find the IP Address of RetailPlayer with the Discovery Tool
- Advanced BGM/Paging/Emergency system with IPAC, RetalPlayer, Barionet and Paging Gateway
- What is Store & Play on RetailPlayer and how it works
- RetailPlayer doesn't connect with the Portal
- Update a RetailPlayer running a FW older than 5.0 to a newer FW (5.x or 6.x)
- Update a RetailPlayer running FW 1.0
- How to hard refresh your browser
- How to schedule messages, announcements, bells, ads and other assets on RetailPlayer
- RetailPlayer Network Requirements
Perhaps also interesting:
- What is the difference between a package number and a device number?
- On the fly IP Address change
- WLAN Broadcast/Multicast Troubleshooting
- How to use Bit-reservoir?
- What is the difference in using PCM MSB and PCM LSB?
- How do emergency messages work ?
- How much latency should I expect in an Instreamer/Exstreamer setup using BTRP ?
- What does BRTP stand for ?
- What does RTP stand for ?
- Which port/s do your devices commonly use ?
- I want to do a broadcast over different subnets, is that possible ?
- I want to set up a local network with more than 250 devices, what do i have to do ?
- Do the Barix products support IPv6 ?
- Do the Barix products support Multicast and IGMP ?
- What is AutoIP, IPzator, etc.and how do I use them?
- SonicIP Voice - can I change this and record my own ?
- What is SonicIP?
- The device already has a password either I don't remember or I don't know, how do I erase it ?
- What if the device is still unreachable after a serial rescue ?
- How do I get the "status page" of any device ?
- How do I set the device back to factory defaults ?
- How do I do a web update of a device ?
- How do i connect a Barix device to HSPDA, UMTS, CDMA, EVDO, wireless networks ?
- What if my routers don't have a fix IP address from the ISP (Internet service provider) ?
- How do the devices get their IP address
- Are there any known security vulnerabilities with Barix devices?
- SIP with Siemens Gigaset
- When was RTP Buffering - Frame Based Buffering introduced?
- Which features are supported by the PC software, ICgraph?
- What you need to know about the ICgraph
- What to do with the SIP client
- How to create music channels on your network
- How to get the software
- How does the Barix system work?
- What is Digital Rights Management?
- Does the new Streaming Client version support the automatic Remote Firmware?
- What is the best way to Stream RTP from PC to Barix Devices?
- What to do with VSC support in the Streaming Client?
- How does the stream switching in the Streaming Client work?
- Windows Media Streaming (MMS/WMA)
- How to configure multicast?
- Protocols used in Barix Products
- SonicIP Howto
- How to customize the default configuration settings of your Barix Audio product.
- What you need to know about the Configuration Update
- Which of the 4 methods to use for operating a FW Update
- How to mount the ESD protection springs?
- Which firmware should you use for which hardware?