Knowledge Base | Barix Help Center

SIP Opus Codec answers:

Page:

How to configure the SIP OPUS in Peer to Peer mode
Page:

Can I configure the SIP Opus to automatically connect on startup
Page:

Password Issues
Page:

SIP OPUS

Perhaps also interesting:

Page:

What is the difference between a package number and a device number?
Page:

On the fly IP Address change
Page:

WLAN Broadcast/Multicast Troubleshooting
Page:

How to use Bit-reservoir?
Page:

What is the difference in using PCM MSB and PCM LSB?
Page:

How do emergency messages work ?
Page:

How much latency should I expect in an Instreamer/Exstreamer setup using BTRP ?
Page:

What does BRTP stand for ?
Page:

What does RTP stand for ?
Page:

Which port/s do your devices commonly use ?
Page:

I want to do a broadcast over different subnets, is that possible ?
Page:

I want to set up a local network with more than 250 devices, what do i have to do ?
Page:

Do the Barix products support IPv6 ?
Page:

Do the Barix products support Multicast and IGMP ?
Page:

What is AutoIP, IPzator, etc.and how do I use them?
Page:

SonicIP Voice - can I change this and record my own ?
Page:

What is SonicIP?
Page:

The device already has a password either I don't remember or I don't know, how do I erase it ?
Page:

What if the device is still unreachable after a serial rescue ?
Page:

How do I get the "status page" of any device ?
Page:

How do I set the device back to factory defaults ?
Page:

How do I do a web update of a device ?
Page:

How do i connect a Barix device to HSPDA, UMTS, CDMA, EVDO, wireless networks ?
Page:

What if my routers don't have a fix IP address from the ISP (Internet service provider) ?
Page:

How do the devices get their IP address
Page:

Are there any known security vulnerabilities with Barix devices?
Page:

SIP with Siemens Gigaset
Page:

When was RTP Buffering - Frame Based Buffering introduced?
Page:

Which features are supported by the PC software, ICgraph?
Page:

What you need to know about the ICgraph
Page:

What to do with the SIP client
Page:

How to create music channels on your network
Page:

How to get the software
Page:

How does the Barix system work?
Page:

What is Digital Rights Management?
Page:

Does the new Streaming Client version support the automatic Remote Firmware?
Page:

What is the best way to Stream RTP from PC to Barix Devices?
Page:

What to do with VSC support in the Streaming Client?
Page:

How does the stream switching in the Streaming Client work?
Page:

Windows Media Streaming (MMS/WMA)
Page:

How to configure multicast?
Page:

Protocols used in Barix Products
Page:

SonicIP Howto
Page:

How to customize the default configuration settings of your Barix Audio product.
Page:

What you need to know about the Configuration Update
Page:

Which of the 4 methods to use for operating a FW Update
Page:

How to mount the ESD protection springs?
Page:

Which firmware should you use for which hardware?