|
Date |
Software Package Download Link |
|---|---|
This image can be installed ONLY on the following Barix devices running an IP Audio Client FW version greater or equal to V2.7.0:
-
Exstreamer M400
-
Exstreamer MPA400
-
Exstreamer MR400
-
IP Former TPA400
-
Annuncicom MPI400
Please don’t install this firmware on any of these products: SIP Opus Codec, Audiopoint, RetailPlayer, Soundscape, Store & Play
Change Log
New Features
-
support new Dante Exclusive mode: a dedicated mode to work as a dedicated Dante 2 channels receiver providing low latency and synchronized playback
-
CPU Temperature Log available in the syslog file
-
HTTP Source: Buffer configuration configurable between 2…120s
-
RTP Source: allow to setup the player with an SDP file
-
Support new IP Former TPA400 Digital Input on HW rev.2
-
Support Mic input in SIP call for IP Former TPA400 and Exstreamer MPA400
-
Support TCP transport in SIP Source
-
API key configurable
-
Added packet capture capabilities to improve troubleshooting processes
Fixes / Improvements
-
Don’t change the application mode after a reset to defaults (i.e. if reset is applied while in Dante Exclusive mode, after the reset the device still runs in Dante Exclusive mode)
-
Improved RTP Player by providing a single playback mode with low latency (190ms end to end) and synchronized playout
-
Fixed sample rate and encoding format in Dante at 48kHz and 24bits
-
FIXED: RTP Forwarding disconnection issues
-
FIXED: RPT Player do not play on its own after a reconnection
-
Removed Playback Mode selector in RTP Source and RTP Forwarding since now the player implemented can handle sync playout and low latency