IP Audio Client Firmware V2.14.0
Date | Software Package Download Link |
|---|---|
|
This image can be installed ONLY on the following Barix devices running an IP Audio Client FW version greater or equal to V2.7.0:
Exstreamer M400
Exstreamer MPA400
Exstreamer MR400
IP Former TPA400
Annuncicom MPI400
Please don’t install this firmware on any of these products: SIP Opus Codec, Audiopoint, RetailPlayer, Soundscape, Store & Play
Change Log
New Features
support new Dante Exclusive mode: a dedicated mode to work as a dedicated Dante 2 channels receiver providing low latency and synchronized playback
CPU Temperature Log available in the syslog file
HTTP Source: Buffer configuration configurable between 2…120s
RTP Source: allow to setup the player with an SDP file
Support new IP Former TPA400 Digital Input on HW rev.2
Support Mic input in SIP call for IP Former TPA400 and Exstreamer MPA400
Support TCP transport in SIP Source
API key configurable
Added packet capture capabilities to improve troubleshooting processes
Fixes / Improvements
Don’t change the application mode after a reset to defaults (i.e. if reset is applied while in Dante Exclusive mode, after the reset the device still runs in Dante Exclusive mode)
Improved RTP Player by providing a single playback mode with low latency (190ms end to end) and synchronized playout
Fixed sample rate and encoding format in Dante at 48kHz and 24bits
FIXED: RTP Forwarding disconnection issues
FIXED: RPT Player do not play on its own after a reconnection
Removed Playback Mode selector in RTP Source and RTP Forwarding since now the player implemented can handle sync playout and low latency