Skip to main content
Skip table of contents

What is the Annuncicom 100?

Network intercom and PA device for transmission of high quality audio, alarm messages, contact closures and serial data over the network. Ideal for monitoring entrances and providing intercom and alarm functionality in large residential, commercial, public, and military building complexes, including airports, production facilities, shopping malls, and remote facilities.

Standard protocols UDP, TCP, SIP and RTP. Supports VoIP and MP3 audio codecs.

A two button (Talk & Door,Talk & Emergency etc.) and relay output interface is available for talk-back and door entry solutions. Recorded messages and tones can be played from the internal flash memory or a a standard USB memory stick.

•G711, G.722, PCM Encoding
•MP3 Encoding (low Latency)
•AACplus, MP3, Ogg Vorbis, G.711, G.722, PCM decoding
•Shoutcast/Icecast Source capability
•Audio Level Supervision with SNMP Trap generation
•IP Streaming via TCP, UDP, RTP, Multicast
•Microphone Input
•Line Level Input
•Line Level Output
•Amplified Output 2W (8 Ohm)                                                                           

•Relay Output (1)
•Contact Closure Input (2)
•RS-232 Serial Port (1)
•RS-485 Serial Port (1)
•Power Supply (12V, included)

More information available in our website:

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.