Skip to main content
Skip table of contents

What do you need to analyze if the Barix device is dead?

Few steps to analyze if the Barix device is dead.

  1. If the device is not announcing the Sonic IP, try by using the Discovery Tool (available on the Barix WEB site) [1]
  2. If you still cannot reach the device, then force Factory Default. Depending on the firmware on the Barix device you have a Tab "Defaults" on the WEB Interface or depending on the HW you can do that by long press (>10sec) of the Reset button.
  3. If none of the previous action is successful you may need to do a Serial Resue. see
  4. finally please contact your Barix distributor or Barix Support for help or a RMA
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.