RCA stereo cable
What you need
Request Stream Configuration
Make sure you got your "Configuration File". Write to firstname.lastname@example.org if you need a Configuration File to create a Stream!
How to Install Video
Step by Step Instructions
The content of the video as text.
1) Connect the Device
Connect the Instreamer ICE to your switch (internet router) using a standard ethernet cable.
Plug the 3.5mm headphones into the mini jack and be prepared to write down an IP address.
Power the device with the included adapter, wait some seconds until the device starts. The IP will be announced as audio.
2) Configure the Radio Stream
Open your browser and enter the IP address you have written down. The configuration interface opens.
Password: Find it at the bottom of your device (white sticker which says "PW").
You are now logged in. Go to "Stream" in the menu and click "Import Stream".
Upload the "Configuration File" you got from Barix Support.
Your stream is now ready.
Recommended standard settings. Barix Support answers all questions if you want to customize something.
Stream Name: Audio Stream (only internal)
Stream Input: Line-IN
Input level: Consumer (-10 dBu)
Input Channel: Stereo
Sampling rate: 44.1 kHz
Bitrate Type: CBR
Bitrate: 128 kb/s
Server Type: Icecast Source
Icecast Name: Radio Stream (change if needed, will be seen by listeners)
Icecast Description: Streaming (change if needed, will be seen by listeners)
Icecast Genre: Radio (change if needed, will be seen by listeners)
Remote URL: 18.104.22.168
Audio Port: 8573
Mount Point: <Insert the "Stream Name" you got from Barix support>
Password: <Insert the "Stream Password" you got from Barix support>
3) Test and Share the Stream
Open the "Stream URL" you got from Barix support in your browser.
Connect the stereo cable to your audio source and play some music or say something into your microphone. You should now be able to hear your sound (some seconds delay included).
Add a play button to your website and add the Stream URL as a link. We have prepared this button in black (download) and button white (download).
Or share the Stream ULR as a Link in your Whats-App Group, Facebook Site, send it per Email etc.
Make sure your computer is in the same network as the Instreamer ICE device.
You can also install the "Barix Discovery Tool" (download) instead of listening to the announcement. This is especially useful if you have many devices.
Whenever you are not actively using the stream we recommend to play some nice music or just leave the setup connected so everything works and people can hear you when you join again at a certain time.
If you wish you can change the password: To do so, go to "Status", click on "Manage Passwords" and change the admin and user profiles.
You can always configure a standard Instreamer ICE (link) here.
Compliance and further Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Safety and precaution recommendations apply. Find them in the download section at www.barix.com
Find your distributor on this list for more hardware.
For questions that are extending the documentation, feel free to contact us on: