Skip to main content
Skip table of contents

IP Audio Client Firmware V2.7.2

Release Notes

IP Audio Client

Release Date



IP Audio Client V2.7.x License: It is possible to install this new release of IP Audio Client onto a device that is running an un-licensed firmware, but once that is done it is not possible to go back to the unlicensed firmware, even if they are the same. i.e. If IPAC 2.7 is installed on an M400 SIP Opus 1.3.4 (which is unlicensed), the firmware will install, but it will not be possible to roll back to SIP Opus anymore. Another example: when updating firmware from previous IP Speaker versions (e.g. IP Speaker V2.6.2 or previous) it will be possible to update but not to roll back.

Change Log

New Features

  • Local File:

    • Added the possibility to play in loop the audio file triggered to play via UDP command in a local file source. The file stops using the Stop command or if an higher priority source plays on top of the Local File one.

Fixes / Improvements

Known Limitations / Issues

  • RTP Dynamic Payload Types not handled (i.e. All the following formats from Instreamer Classic are not playing on IP Audio Client)r: 

    • G.711 uLaw / Mono 24kHz - G.711 aLaw / Mono 24KHz 

    • PCM 24 Khz 16 bit mono big endian - PCM 8 Khz 16 bit mono big endian - PCM 24 Khz 16 bit mono little endian - PCM 8 Khz 16 bit mono little endian - PCM 32 Khz 16 bit mono big endian - PCM 12 Khz 16 bit mono big endian - PCM 32 Khz 16 bit mono little endian - PCM 12 Khz 16 bit mono little endian - PCM 44.1 kHz 16bit stereo little endian - PCM 48KHz 16bit stereo little endian - PCM 48KHz 16bit stereo big endian 

  • Audio file names doesn't accept special characters and maximum one space between words

  • When uploading audio files as .zip archive the maximum size is 16MB.

  • Configuration Tool: SIP Server settings related to username must be entered manually in the tool for each device despite they are copied from one device to all others when pushing the configuration or copying and inserting. 

  • The configuration tool, when controlling a large number of devices. needs to be refreshed by clicking on the "READ ALL" button to display again all the devices after new configurations are applied. 

  • Configuration Tool: the green cell indicating the playing source is not updated in real time. It requires the user to click the READ ALL button. 



Recipient / Environment

Software Package / Version



JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.