Skip to main content
Skip table of contents

IP Audio Client Firmware V2.10.1


Software Package Download Link


This image can be installed ONLY on the following Barix devices running an IP Audio Client FW version greater or equal to V2.7.0:

  • Exstreamer M400

  • IP Former TPA400

  • Exstreamer MPA400

  • Annuncicom MPI400 (new entry from V2.10!)

Please don’t install this firmware on any of these products: SIP Opus Codec, Audiopoint, RetailPlayer, Soundscape, Store & Play

Change Log

New Features

Fixes / Improvements

FIXED: AES67 Mode: driver goes into an infinite underrun state when booting without the source being in the network and feeding the capture interface

FIXED: AES67 Mode: support for MONO channels on IP Former TPA400 and on Exstreamer M400

Known Limitations / Issues

  • Configuration Tool: SIP Server settings related to username must be entered manually in the tool for each device despite they are copied from one device to all others when pushing the configuration or copying and inserting.

  • Configuration Tool: the green cell indicating the playing source is not updated in real time. It requires the user to click the READ ALL button. 

  • RTP Regular mode: frequency drifts (playback speed adjustments) when playing formats with lower sample rates (e.g. G711 @ 8kHz)

  • AES67 Mono channel streams are not supported on Exstreamer MPA400. Use always stereo.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.