Barionet Add Ons

Manuals for Barionet Extension devices

Link to Barix tutorials:

Barix Barionet - How to connect Barionet Extension units to the Barionet (video)

Barionet50 Introduction + create a BCL application (video)

General Barionet product introduction (video)

Barix Hands-on Training guide for Barionet50/100 (PDF)

BCL DEMO application inclusive source code:
^{(To use this DEMO applications load it via TFTP (Barionet100) or via advanced Webupdate (Barionet50) to “WEB4”}
^{of your Barionet to overwrite the existing BCL application on the Barionet.}
^{After installation check the online help in the APPLICATION SETUP to see how it works!)}

Barionet Extension_addressing Tool V1.01
Short description: allows to connect & control upto 7 Extension devices (IO12, R6 and/or X8) to Barionet50/100

Barionet Extension Addressing Tool V1.01 without CRC check (faster)
Short description: allows to connect & control upto 7 Extension devices (IO12, R6 and/or X8) to Barionet50/100,
but without check sum check for faster loop time.

CGI_Output State V1.1
Short description: adds CGI command “/basic.cgi?state=xxx” to request IO state over CGI

Second SNMP Trap V1.02
Short description: add second SNMP trap for IO state change notification, e.g. for Informacast

IO_HTTP V1.0 (IO trigger for UDP-, TCP- ,HTTP- ,serial- and/or local commands)
Short description: universal communcation tool, triggering free configurable messages (USP, TCP, HTTP, serial RS232/485) via digital input activity,
additionally even local relay can be triggered

Barionet scheduler app without summer time change
Short description: BCL demo for scheduling

NTP example
Short description: BCL demo for scheduling via NTP

Pulse Relay
Short description: BCL demo adds commands to pulse the relays

Modbus-RTU Slave for Barionet
Short description: BCL demo to control the Barionet registers via Modbus RTU over serial

Barionet IO12 tunnel V1.02
Short description: two Barionets with connected IO12 devices can exchange IO information over network,
e.g. input signal of first IO12 input of Barionet A is controlling first output on the IO12 of Barionet B.

MBT Tool_V15

firmware loader for X8 and IO12, requires Barionet to update the firmware
Here you can find the instructions:

Barionet - X8 and IO12 - Firmware update.pdf